VS-GA300TD60S www.vishay.com vishay semiconductors revision: 11-dec-17 1 document number: 93362 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dual int-a-pak low profile half bridge (standard speed igbt), 300 a features ? gen 4 igbt technology ? standard: optimized fo r hard switching speed ?low v ce(on) ? square rbsoa ?hexfred ? antiparallel diode wi th ultrasoft reverse recovery characteristics ? industry standard package ?al 2 o 3 dbc ? ul approved file e78996 ? designed for industrial level ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 benefits ? increased operating efficiency ? performance optimized as output inverter stage for tig welding machines ? direct mounting on heatsink ? very low junction to case thermal resistance note (1) maximum continuous co llector current must be limited to 500 a to do not exceed the ma ximum temperatur e of terminals primary characteristics v ces 600 v i c dc at t c = 25 c 530 a v ce(on) (typical) at 300 a, 25 c 1.24 v speed dc to 1 khz package dual int-a-pak low profile circuit configur ation half bridge dual int-a-pak low pro?le absolute maximum ratings parameter symbol test conditions max. units collector to em itter voltage v ces 600 v continuous coll ector current i c (1) t c = 25 c 530 a t c = 80 c 376 pulsed collector current i cm 800 clamped inductive load current i lm 800 diode continuous forward current i f t c = 25 c 219 t c = 80 c 145 gate to emi tter voltage v ge 20 v maximum power dissipation (igbt) p d t c = 25 c 1136 w t c = 80 c 636 rms isolation voltage v isol any terminal to case ? (v rms t = 1 s, t j = 25 c) 3500 v
VS-GA300TD60S www.vishay.com vishay semiconductors revision: 11-dec-17 2 document number: 93362 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical specifications (t j = 25 c unless otherwise specified) parameter symbol test conditions min. typ. max. units collector to emitte r breakdown voltage v br(ces) v ge = 0 v, i c = 500 a 600 - - v collector to em itter voltage v ce(on) v ge = 15 v, i c = 150 a - 1.04 1.15 v ge = 15 v, i c = 300 a - 1.24 1.45 v ge = 15 v, i c = 150 a, t j = 125 c - 0.96 1.06 v ge = 15 v, i c = 300 a, t j = 125 c - 1.22 1.42 gate threshold voltage v ge(th) v ce = v ge , i c = 250 a 2.9 4.8 6.3 collector to emitter leakage current i ces v ge = 0 v, v ce = 600 v - 0.02 0.75 ma v ge = 0 v, v ce = 600 v, t j = 125 c - 1.5 10 diode forward voltage drop v fm i fm = 150 a - 1.23 1.39 v i fm = 300 a - 1.48 1.75 i fm = 150 a, t j = 125 c - 1.17 1.33 i fm = 300 a, t j = 125 c - 1.50 1.77 gate to emitter leakage current i ges v ge = 20 v - - 200 na switching characteristics (t j = 25 c unless otherwise specified) parameter symbol test conditio ns min. typ. max. units turn-on switching loss e on i c = 300 a, v cc = 360 v, v ge = 15 v, ? r g = 1.5 ? , l = 500 h, t j = 25 c -9- mj turn-off switching loss e off -90- total switching loss e tot -99- turn-on switching loss e on i c = 300 a, v cc = 360 v, v ge = 15 v, ? r g = 1.5 ? , l = 500 h, t j = 125 c -23- turn-off switching loss e off - 133 - total switching loss e tot - 156 - turn-on delay time t d(on) - 442 - ns rise time t r - 301 - turn-off delay time t d(off) - 406 - fall time t f - 1570 - reverse bias safe operating area rbsoa t j = 150 c, i c = 800 a, v cc = 400 v ? v p = 600 v, r g = 22 ??? v ge = 15 v to 0 v, l = 500 h fullsquare diode reverse recovery time t rr i f = 300 a, di f /dt = 500 a/s, ? v cc = 400 v, t j = 25 c - 150 179 ns diode peak reverse current i rr -4359a diode recovery charge q rr -3.96.3c diode reverse recovery time t rr i f = 300 a, di f /dt = 500 a/s, ? v cc = 400 v, t j = 125 c - 236 265 ns diode peak reverse current i rr -6480a diode recovery charge q rr - 8.6 11.1 c thermal and mechanical specifications parameter symbol min. typ. max. units operating junction and storage temperature range t j , t stg -40 - 150 c junction to case per leg igbt r thjc - - 0.11 c/w diode - - 0.4 case to sink per module r thcs -0.05- mounting torque case to heatsink: m6 screw 4 - 6 nm case to terminal 1, 2, 3: m5 screw 2 - 5 weight - 270 - g
VS-GA300TD60S www.vishay.com vishay semiconductors revision: 11-dec-17 3 document number: 93362 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - typical output characteristics, t j = 25 c, v ge = 15 v fig. 2 - typical output characteristics, t j = 125 c fig. 3 - maximum dc igbt collector current vs. case temperature fig. 4 - typical igbt collector to emitter voltage vs. junction temperature, v ge = 15 v fig. 5 - typical igbt transfer characteristics fig. 6 - typical igbt gate threshold voltage i c (a) v ce (v) 0.25 0.75 0.50 1.00 1.50 2.00 1.25 1.75 0 93362_01 600 200 100 400 300 500 t j = 25 c t j = 125 c i c (a) v ce (v) 0.25 0.50 1.00 1.50 2.00 1.25 0.75 1.75 2.25 93362_02 0 600 200 100 400 300 500 v g e = 9 v v g e = 12 v v g e = 15 v v g e = 18 v allowable case temperature (c) i c - continuous collector current (a) 400 300 200 100 500 600 0 100 160 0 40 60 140 80 120 20 93362_03 dc v ce (v) t j (c) 20 40 80 120 160 60 100 140 0.6 1.0 1.4 93362_04 1.7 0.9 1.3 0.8 1.2 1.6 0.7 1.1 1.5 400 a 300 a 150 a i c (a) v g e (v) 410 56 8 79 0 100 200 400 300 500 93362_05 600 t j = 25 c t j = 125 c v ce = 20 v v g eth (v) i c (ma) 0.4 1.0 0.5 0.6 0.8 0.7 0.9 2.5 3.0 3.5 4.5 4.0 5.0 93362_06 5.5 t j = 25 c t j = 125 c
VS-GA300TD60S www.vishay.com vishay semiconductors revision: 11-dec-17 4 document number: 93362 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - igbt reverse bias soa, t j = 150 c, v ge = 15 v, r g = 22 ? fig. 8 - typical igbt zero gate voltage collector current fig. 9 - typical diode forward characteristics fig. 10 - maximum dc forward current vs. case temperature fig. 11 - typical igbt energy loss vs. i c , t j = 125 c, v cc = 360 v, r g = 1.5 ? , v ge = 15 v, l = 500 h fig. 12 - typical igbt switching time vs. i c , t j = 125 c, v cc = 360 v, r g = 1.5 ? , v ge = 15 v, l = 500 h i c (a) v ce (v) 1 10 100 1000 1 93362_07 10 000 10 100 1000 i ce s (ma) v ce s (v) 100 600 200 300 400 500 0.001 93362_08 10 0.1 0.01 1 t j = 25 c t j = 125 c i f (a) v fm (v) 02.5 0.5 1.0 1.5 2.0 0 93362_09 600 200 100 300 500 400 t j = 25 c t j = 125 c allowable case temperature (c) i f - continuous forwar d current (a) 160 120 80 40 200 240 0 100 160 0 40 60 140 80 120 20 93362_10 dc ener g y (mj) i c (a) 0 50 100 200 250 300 150 350 0 93362_11 150 100 125 50 75 25 e on e off s witchin g time (ns) i c (a) 0 50 250 150 100 300 200 350 10 93362_12 10 000 100 1000 t d(off) t d(on) t r t f
VS-GA300TD60S www.vishay.com vishay semiconductors revision: 11-dec-17 5 document number: 93362 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - typical igbt energy loss vs. r g , t j = 125 c, i c = 300 a, v cc = 360 v, v ge = 15 v, l = 500 h fig. 14 - typical igbt switching time vs. r g , t j = 125 c, i c = 300 a, v cc = 360 v, v ge = 15 v, l = 500 h fig. 15 - typical reverse recovery time vs. di f /dt, v cc = 400 v, i f = 300 a fig. 16 - typical reverse recovery current vs. di f /dt, v cc = 400 v, i f = 300 a fig. 17 - typical reverse recovery charge vs. di f /dt, v cc = 400 v, i f = 300 a ener g y (mj) r g ( ) 0 5 10 20 15 25 0 93362_13 150 75 125 100 50 25 e on e off s witchin g time (ns) r g ( ) 0 5 15 20 10 25 100 93362_14 10 000 1000 t d(off) t d(on) t f t r t rr (ns) d i f / d t (a/s) 100 200 400 600 800 1000 300 500 700 900 100 300 240 120 160 200 260 280 140 180 220 93362_15 t j = 25 c t j = 125 c i rr (a) di f /dt (a/s) 100 200 400 600 800 1000 300 500 700 900 10 130 90 110 120 30 50 70 80 100 20 40 60 93362_16 t j = 25 c t j = 125 c q rr (c) d i f / d t (a/s) 100 200 400 600 800 1000 300 500 700 900 0 22 16 4 2 6 8 20 12 14 18 10 93362_17 t j = 25 c t j = 125 c
VS-GA300TD60S www.vishay.com vishay semiconductors revision: 11-dec-17 6 document number: 93362 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 18 - maximum thermal impedance z thjc characteristics (igbt) fig. 19 - maximum th ermal impedance z thjc characteristics (diode) ordering information table 0.001 0.01 0.1 1 0.00001 93362_18 0.0001 0.001 0.01 0.1 1 t 1 - rectan g ular pulse duration (s) z thjc - thermal impe d ance junction to case (c/w) 10 d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01 dc 0.001 0.01 0.1 1 0.00001 93362_19 0.0001 0.001 0.01 0.1 1 t 1 - rectan g ular pulse duration (s) z thjc - thermal impe d ance junction to case (c/w) 10 d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01 dc 1 - insulated gate bipolar transistor (igbt) 2 - a = gen 4 igbt 3 - current rating (300 = 300 a) 4 - circuit configuration (t = half bridge) 5 - package indicator (d = dual int-a-pak low profile) 6 - voltage rating (60 = 600 v) 7 - speed / type (s = standard speed igbt) device code 5 1 3 2 4 6 7 g a 300 t d 60 s
VS-GA300TD60S www.vishay.com vishay semiconductors revision: 11-dec-17 7 document number: 93362 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 circuit configuration links to related documents dimensions www.vishay.com/doc?95435 4 5 1 6 7 3 2
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
